Introduction to PET
Polythylene terephthalate, abbreviated as PET or PETP (hereinafter referred to as “PET”), is the most important type of thermoplastic polyester. It is the condensation and polymerization product of p-
Four molding stages of blow molded products
To make and mold blow molded products, 4 important steps and stages will be needed. A full understanding of these 4 key steps is helpful for significantly improving product quality.
In injection molding of PET preforms, what are noteworthy?
1. Plastic treatment PET, as a macromolecule, contains ester groups and is somewhat hydrophilic. The granular PET is relatively sensitive at high temperature. When moisture content goes beyond the lim
Classification of PET Bottle Caps
1. Purpose (the materials bracketed are for general manufacturing): caps of sterile bottles for cold filling (PE), caps of bottles for hot filling (PE), caps of room-temperature (water) bottles withou
18688888124
771063273@qq.com